Petromet Flange Inc is one of the largest Long Weld Neck Flanges Manufacturer in India. A Long Weld Neck Flange is a reinforced flange connection used primarily in Pressure Vessel applications. The Long Weld Neck Flange was designed for replacement of a Weld Neck Flange and an inch of pipe for a bolt-up connection to a vessel. The Long Weld Neck Flange gives greater durability when exposed to higher pressures or extreme temperatures, or other changing stresses. Two welds link the Slip On Flange to the pipe, one on the rear side of the Flange and one on the interior of the Flange.
Petromet Flange INC is reputed and well-known across the globe for its reliability and quality. Long weld neck flanges have a tapered hub this design ensures that internal stress caused by the flow of high-pressure liquid is transmitted to the pipe, decreasing stress on the flange itself. We make sure our clients receive best products and services from us. We also have stock of different materials and grades including Monel, Inconel, Hastalloy, Titanium & more. We are also a well-known Ring Type Joint Flanges Manufacturer in India.
Our products are always affordable and made out of high-quality raw materials which makes us a notable Long Weld Neck Flanges Manufacturer in India, also our team oversees the quality of Long Weld Neck Flanges and other products during all stages of production and distribution, including the choice of raw materials, processing, labeling, packaging, storage, and shipment.
Long Weld Neck Flanges are available in various Size, Standard, Grade. Each with its own Specifications.
There are several types of Long Weld Neck Flanges that can be used in piping and tubing systems. The most common type is the Long Weld Neck Flanges, which is used to seal off a section of pipe.
Long Weld Neck Flanges Supplier – Chemical Composition
Austenitic and Ferritic Stainless Steel grades are specifically combined to produce high strength and outstanding corrosion resistance in Long Weld Neck Flanges. Depending on the specific grade, the precise chemical makeup of Long Weld Neck Flanges can change.
ASTM A182 GRADE | C | Mn | P | S | Si | Ni | Cr | Mo | Nb | Ti | Others |
---|---|---|---|---|---|---|---|---|---|---|---|
F304(1) | 0.08 | 2.0 | 0.045 | 0.030 | 1.0 | 8.0-11.0 | 18.0-20.0 | ||||
F304H | 0.04-0.10 | 2.0 | 0.045 | 0.030 | 1.0 | 8.0-11.0 | 18.0-20.0 | ||||
F304L(1) | 0.030 | 2.0 | 0.045 | 0.030 | 1.0 | 8.0-13.0 | 18.0-20.0 | ||||
F304N(2) | 0.08 | 2.0 | 0.045 | 0.030 | 1.0 | 8.0-10.5 | 18.0-20.0 | ||||
F304LN(2) | 0.030 | 2.0 | 0.045 | 0.030 | 1.0 | 8.0-10.5 | 18.0-20.0 | ||||
F309H | 0.04-0.10 | 2.0 | 0.045 | 0.030 | 1.0 | 12.0-15.0 | 22.0-24.0 | ||||
F310 | 0.25 | 2.0 | 0.045 | 0.030 | 1.0 | 19.0-22.0 | 24.0-26.0 | ||||
F310H | 0.04-0.10 | 2.0 | 0.045 | 0.030 | 1.0 | 19.0-22.0 | 24.0-26.0 | ||||
F310MoLN | 0.030 | 2.0 | 0.030 | 0.015 | 0.40 | 21.0-23.0 | 24.0-26.0 | 2.0-3.0 | N 0.10-0.16 | ||
F316 | 0.08 | 2.0 | 0.045 | 0.030 | 1.0 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | |||
F316H | 0.04-0.10 | 2.0 | 0.045 | 0.030 | 1.0 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | |||
F316L(1) | 0.030 | 2.0 | 0.045 | 0.030 | 1.0 | 10.0-15.0 | 16.0-18.0 | 2.0-3.0 | |||
F316N(2) | 0.08 | 2.0 | 0.045 | 0.030 | 1.0 | 11.0-14.0 | 16.0-18.0 | 2.0-3.0 | |||
F316LN(2) | 0.030 | 2.0 | 0.045 | 0.030 | 1.0 | 11.0-14.0 | 16.0-18.0 | 2.0-3.0 | |||
F316Ti | 0.08 | 2.0 | 0.045 | 0.030 | 1.0 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | (3) | N 0.10 max | |
F317 | 0.08 | 2.0 | 0.045 | 0.030 | 1.0 | 11.0-15.0 | 18.0-20.0 | 3.0-4.0 | |||
F317L | 0.030 | 2.0 | 0.045 | 0.030 | 1.0 | 11.0-15.0 | 18.0-20.0 | 3.0-4.0 | |||
F321 | 0.08 | 2.0 | 0.045 | 0.030 | 1.0 | 9.0-12.0 | 17.0-19.0 | (4) | |||
F321H | 0.04-0.10 | 2.0 | 0.045 | 0.030 | 1.0 | 9.0-12.0 | 17.0-19.0 | (5) | |||
F347 | 0.08 | 2.0 | 0.045 | 0.030 | 1.0 | 9.0-13.0 | 17.0-20.0 | (6) | |||
F347H | 0.04-0.10 | 2.0 | 0.045 | 0.030 | 1.0 | 9.0-13.0 | 17.0-20.0 | (7) | |||
F348 | 0.08 | 2.0 | 0.045 | 0.030 | 1.0 | 9.0-13.0 | 17.0-20.0 | (6) | Co 0.20 Ta 0.10 |
||
F348H | 0.04-0.10 | 2.0 | 0.045 | 0.030 | 1.0 | 9.0-13.0 | 17.0-20.0 | (7) | Co 0.20 Ta 0.10 |
Long Weld Neck Flanges Supplier – Mechanical Properties
Long Weld Neck Flanges mechanical qualities are highly prized in a variety of industries, including pulp and paper, chemical, and oil and gas. Long Weld Neck Flanges are extremely resistant to corrosion and other sorts of damage due to these qualities, which also include strength, toughness, and ductility.
ASTM A182 Grade | Minimum Tensile Strength in MPa |
Minimum Yield point in Mpa |
Minimum Elongation in % |
Minimum Reduction of in min, % |
---|---|---|---|---|
ASTM A182 F304 | 515 | 205 | 30 | 50 |
ASTM A182 F304L | 485 | 170 | 30 | 50 |
ASTM A182 F316 | 515 | 205 | 30 | 50 |
ASTM A182 F316L | 485 | 170 | 30 | 50 |
ASTM A182 F321 | 515 | 205 | 30 | 50 |
ANSI B16.5 Long Weld Neck Flanges Weight Chart Pdf
Long Weld Neck Flanges Weight Chart provides weight requirements for various diameters, assisting with optimal selection and safe handling during installation and transportation in pipe systems.
Standard | Class | Diameter | Bolt Circle Diameter | Number of Bolts | Bolt Size | Diameter of Bolt Hole |
---|---|---|---|---|---|---|
AS4087 | PN14 | 95 | 67 | 4 | M12 | 14 |
AS 2129 Flange | Table C | 95 | 67 | 4 | 13 | 14 |
Table D | 95 | 67 | 4 | 13 | 14 | |
Table E | 95 | 67 | 4 | 13 | 14 | |
Table F | 95 | 67 | 4 | 13 | 14 | |
Table H | 114 | 83 | 4 | 16 | 17 | |
Table J | 114 | 83 | 4 | 16 | 17 | |
ANSI B16.5 | ANSI 150 | 89 | 60 | 4 | 13 | 16 |
ANSI 300 | 95 | 67 | 4 | 13 | 16 | |
ANSI 600 | 95 | 67 | 4 | 13 | 16 | |
ANSI 900 | 121 | 83 | 4 | 19 | 22 | |
ANSI 1500 | 121 | 83 | 4 | 19 | 22 | |
ISO 7005 (DIN) Flange | PN6 | 80 | 55 | 4 | M10 | 11 |
PN10 | 95 | 65 | 4 | M12 | 14 | |
PN16 | 95 | 65 | 4 | M12 | 14 | |
PN20 | 90 | 60.5 | 4 | M14 | 16 | |
PN25 | 95 | 65 | 4 | M12 | 14 | |
PN40 | 95 | 65 | 4 | M12 | 14 |
Applications and Uses of Long Weld Neck Flanges
Additional Information: Delivery, Packing, Dispatch Location & more
We also provide specially designed Long Weld Neck Flanges as per the requirements and specifications of the client. Orders us for guaranteed fast delivery in India. The main reason being we have outstanding warehousing and storage facilities for both finished and unfinished goods.
Product supplied | City |
---|---|
Long Weld Neck Flanges for Automobile Industry | Bareilly, Uttar Pradesh |
Long Weld Neck Flanges supply | Hosdurg, Kerela |
Long Weld Neck Flanges supply for Defence Industry | Banglore, Karnataka |
Long Weld Neck Flanges for the aerospace industry | Surat, Gujarat |
We are a known Long Weld Neck Flanges Stockist In India. We work with various manufacturers to ensure that we have a vast inventory of fittings available. Being a Long Weld Neck Flanges Supplier In India we make sure that we have a good understanding of customer needs to provide high-quality products that meet the industry standards.
Our high quality of Long Weld Neck Flanges, sensible client service and in-house Long Weld Neck Flanges processing capabilities have made us one of the emerging and leading Long Weld Neck Flanges Expporter In India. We export Long Weld Neck Flanges in more than 25 countries.
Address:
69/71, 2nd Kumbharwada Lane (Sant Sena Maharaj Marg), Mumbai - 400004, Maharashtra, India.
Mail Us:
Call Us: